Jump to content

International Bureau of Weights and Measures

Coordinates: 48°49′45.55″N 2°13′12.64″E / 48.8293194°N 2.2201778°E / 48.8293194; 2.2201778
From Wikipedia, the free encyclopedia

International Bureau of Weights and Measures
Bureau International des Poids et Mesures
AbbreviationBIPM (from French name)
Formation20 May 1875; 149 years ago (1875-05-20)
TypeIntergovernmental
Location
Coordinates48°49′45.55″N 2°13′12.64″E / 48.8293194°N 2.2201778°E / 48.8293194; 2.2201778
Region served
Worldwide
Membership64 member states
37 associate states (see the list)
Official language
French and English
Director
Martin Milton
Websitewww.bipm.org
Seal of the BIPM
Metre Convention signatories

The International Bureau of Weights and Measures (French: Bureau International des Poids et Mesures, BIPM) is an intergovernmental organisation, through which its 64 member-states act on measurement standards in areas including chemistry, ionising radiation, physical metrology, as well as the International System of Units (SI) and Coordinated Universal Time (UTC).[1][2] It is based in Saint-Cloud, near Paris, France. The organisation has been referred to as IBWM (from its name in English) in older literature.[note 1]

Structure

[edit]

The BIPM is overseen by the International Committee for Weights and Measures (French: Comité international des poids et mesures, CIPM), a committee of eighteen members that meet normally in two sessions per year,[4] which is in turn overseen by the General Conference on Weights and Measures (French: Conférence générale des poids et mesures, CGPM) that meets in Paris usually once every four years, consisting of delegates of the governments of the Member States[5][6] and observers from the Associates of the CGPM. These organs are also commonly referred to by their French initialisms.

History

[edit]

The Foundation of the International Bureau of Weights and Measures followed the Metre Convention of 1875, after the Franco-Prussian War (1870–1871). It culminated in the first General Conference on Weights and Measures in 1889, when the States parties to the Metre Convention received the standards for the metre and the kilogram.[7][8]

After the French Revolution, Napoleonic Wars led to the adoption of the metre in Latin America following independence of Brazil and Hispanic America,[9] while the American Revolution prompted the foundation of the Survey of the Coast in 1807 and the creation of the Office of Standard Weights and Measures in 1830.[10] During the mid-19th century, the metre was adopted in Khedivate of Egypt an autonomous tributary state of the Ottoman Empire for the cadastre work.[11][12][13] In continental Europe, metrication and a better standardisation of units of measurement marked the Technological Revolution, a period in which German Empire would challenge Britain as the foremost industrial nation in Europe. This was accompanied by development in cartography which was a prerequisite for both military operations and the creation of the infrastructures needed for industrial development such as railways. During the process of unification of Germany, geodesists called for the establishment of an International Bureau of Weights and Measures in Europe.[9][14]

When Carlos Ibáñez e Ibáñez de Ibero first president of both the International Geodetic Association and the International Committee for Weigths and Measures took part to the remeasurement and extention of the arc measurement of Delambre and Méchain, mathematicians like Legendre and Gauss had developed new methods for processing data, including the least squares method which allowed to compare experimental data tainted with observational errors to a mathematical model.[15][16] Moreover the International Bureau of Weights and Measures would have a central role for international geodetic measurements as Charles Édouard Guillaume's discovery of invar minimized the impact of measurement inaccuracies due to temperature systematic errors.[8] The Earth measurements thus underscored the importance of the scientific method at a time when statistics were implemented in geodesy.[16][15] As a leading scientist of his time, Carlos Ibáñez e Ibáñez de Ibero was one of the 81 initial members of the International Statistical Institute (ISI) and delegate of Spain to the first ISI session (now called World Statistic Congress) in Rome in 1887.[17][18] On the other hand, the fondation of the United States Coast and Geodetic Survey by Ferdinand Rudolph Hassler led to the actual definition of the metre, with Charles Sanders Peirce being the first to experimentally link the metre to the wave length of a spectral line. Albert Abraham Michelson soon took up the idea and improved it.[19]

Function

[edit]

The BIPM has the mandate to provide the basis for a single, coherent system of measurements throughout the world, traceable to the International System of Units (SI). This task takes many forms, from direct dissemination of units to coordination through international comparisons of national measurement standards (as in electricity and ionising radiation).[citation needed]

Following consultation, a draft version of the BIPM Work Programme is presented at each meeting of the General Conference for consideration with the BIPM budget. The final programme of work is determined by the CIPM in accordance with the budget agreed to by the CGPM.[citation needed]

Currently, the BIPM's main work includes:[20][21][22]

  • Scientific and technical activities carried out in its four departments: chemistry, ionising radiation, physical metrology, and time
  • Liaison and coordination work, including providing the secretariat for the CIPM Consultative Committees and some of their Working Groups and for the CIPM MRA, and providing institutional liaison with the other bodies supporting the international quality infrastructure and other international bodies
  • Capacity building and knowledge transfer programs to increase the effectiveness within the worldwide metrology community of those Member State and Associates with emerging metrology systems
  • A resource centre providing a database and publications for international metrology

The BIPM is one of the twelve member organisations of the International Network on Quality Infrastructure (INetQI), which promotes and implements QI activities in metrology, accreditation, standardisation and conformity assessment.[23]

The BIPM has an important role in maintaining accurate worldwide time of day. It combines, analyses, and averages the official atomic time standards of member nations around the world to create a single, official Coordinated Universal Time (UTC).[24]

Directors

[edit]
Pavillon de Breteuil in Saint-Cloud, France

Since its establishment, the directors of the BIPM have been:[25][26]

Name Country Mandate Notes
Gilbert Govi Italy 1875–1877
J. Pernet Switzerland 1877–1879 Acting director
Ole Jacob Broch Norway 1879–1889
J.-René Benoît France 1889–1915
Charles Édouard Guillaume Switzerland 1915–1936
Albert Pérard France 1936–1951
Charles Volet Switzerland 1951–1961
Jean Terrien France 1962–1977
Pierre Giacomo France 1978–1988
Terry J. Quinn United Kingdom 1988–2003 Honorary director
Andrew J. Wallard United Kingdom 2004–2010 Honorary director
Michael Kühne Germany 2011–2012
Martin J. T. Milton United Kingdom 2013–present

See also

[edit]

Notes

[edit]
  1. ^ English translations by government agencies have used the initialism IBWM in documentation.[3]

References

[edit]
  1. ^ Staff writer (2024). "Bureau international des poids et mesures (BIPM)". UIA Global Civil Society Database. uia.org. Brussels, Belgium: Union of International Associations. Yearbook of International Organizations Online. Retrieved 1 February 2025.
  2. ^ "Welcome". BIPM. Retrieved 4 March 2024.
  3. ^ "5 FAH-3 H-310 Organization acronyms". Foreign Affairs Manual. Retrieved 23 January 2024.
  4. ^ "International Committee for Weights and Measures (CIPM)". BIPM. Retrieved 9 April 2021.
  5. ^ Pellet, Alain (2009). Droit international public. LGDJ. p. 574. ISBN 978-2-275-02390-8.
  6. ^ Schermers, Henry G.; Blokker, Niels M. (2018). International Institutional Law. Brill. pp. 302–303. ISBN 978-90-04-38165-0.
  7. ^ Débarbat, Suzanne; Quinn, Terry (2019). "Les origines du système métrique en France et la Convention du mètre de 1875, qui a ouvert la voie au Système international d'unités et à sa révision de 2018". Comptes Rendus. Physique (in French). 20 (1–2): 6–21. doi:10.1016/j.crhy.2018.12.002. ISSN 1878-1535.
  8. ^ a b "History – The BIPM 150". Retrieved 24 January 2025.
  9. ^ a b Alder, Ken; Devillers-Argouarc'h, Martine (2015). Mesurer le monde: l'incroyable histoire de l'invention du mètre. Libres Champs. Paris: Flammarion. pp. 499–520. ISBN 978-2-08-130761-2.
  10. ^ Cajori, Florian (1921). "Swiss Geodesy and the United States Coast Survey". The Scientific Monthly. 13 (2): 117–129. Bibcode:1921SciMo..13..117C. ISSN 0096-3771.
  11. ^ Jamʻīyah al-Jughrāfīyah al-Miṣrīyah (1876). Bulletin de la Société de géographie d'Égypte. University of Michigan. [Le Caire]. pp. 6–16.
  12. ^ Ismāʿīl-Afandī Muṣṭafá (1886). Notes biographiques de S.E. Mahmoud Pacha el Falaki (l'astronome), par Ismail-Bey Moustapha et le colonel Moktar-Bey. pp. 10–11.
  13. ^ Ismāʿīl-Afandī Muṣṭafá (1864). Recherche des coefficients de dilatation et étalonnage de l'appareil à mesurer les bases géodésiques appartenant au gouvernement égyptien / par Ismaïl-Effendi-Moustapha, ...
  14. ^ Bericht über die Verhandlungen der vom 30. September bis 7. October 1867 zu BERLIN abgehaltenen allgemeinen Conferenz der Europäischen Gradmessung (PDF) (in German). Berlin: Central-Bureau der Europäischen Gradmessung. 1868. pp. 123–134.
  15. ^ a b "Earth, Figure of the" . Encyclopædia Britannica. Vol. 8 (11th ed.). 1911. pp. 801–813.
  16. ^ a b "Mesure du 1er mètre : une erreur qui changea le monde". Techniques de l'Ingénieur (in French). Retrieved 30 March 2025.
  17. ^ Soler, T. (1 February 1997). "A profile of General Carlos Ibáñez e Ibáñez de Ibero: first president of the International Geodetic Association". Journal of Geodesy. 71 (3): 176–188. doi:10.1007/s001900050086. ISSN 1432-1394.
  18. ^ [webmastergep@unav.es], Izaskun Martínez. "Carlos Ibáñez e Ibáñez de Ibero (Grupo de Estudios Peirceanos)". www.unav.es. Archived from the original on 26 December 2024. Retrieved 17 February 2025.
  19. ^ Crease, Robert P. (1 December 2009). "Charles Sanders Peirce and the first absolute measurement standard". Physics Today. 62 (12): 39–44. Bibcode:2009PhT....62l..39C. doi:10.1063/1.3273015. ISSN 0031-9228.
  20. ^ Wallard, Andrew J. (March 2006). "The International System of Units (SI brochure (EN)): 8th edition, 2006" (PDF).
  21. ^ "BIPM: Our work programme". BIPM. Archived from the original on 30 May 2020. Retrieved 14 May 2020.
  22. ^ Cai, Juan (Ada). "The Case of the International Bureau of Weights and Measures (BIPM)" (PDF). oecd.org. OECD. Archived (PDF) from the original on 9 October 2022. Retrieved 9 April 2021.
  23. ^ "International Network on Quality Infrastructure". INetQI. Retrieved 9 April 2021.
  24. ^ "Time Coordinated Universal Time (UTC)". BIPM. Archived from the original on 29 May 2020. Retrieved 14 May 2020.
  25. ^ "Directors of the BIPM since 1875". Bureau International des Poids et Mesures. 2018. Archived from the original on 27 March 2015. Retrieved 14 May 2020.
  26. ^ "NPL Fellow, Dr Martin Milton, is new Director at foundation of world's measurement system". QMT News. Quality Manufacturing Today. August 2012. Archived from the original on 29 May 2020. Retrieved 14 May 2020.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=International_Bureau_of_Weights_and_Measures&oldid=1283119505"